WP1500 – Pump Group 3
- High-Performance external gear pump for heavy-duty-application
- Compact 3-piece design
- Aluminum housing, cast iron front flange and rear cover
- Noise optimized
- Multiple section possible (up to 4 sections)
- Standard interfaces available
- Reinforced front bearings (SAE-B interface) available
- Customized options on demand
- Displacement : 19 – 50 cm³/rev (1.159 – 3.051 in³/rev)
- Max. rated pressure : 276 bar (4000 PSI)
- Speed range : 500 to 3300 RPM
Product Configurator
Streamline your design process with our innovative product configurator.
Configure your product| Displacement (in³/rev) / (cm³/rev – for reference) | Rated pressure (PSI) | Maximum speed (RPM) |
|---|---|---|
| 1.159 / (19.0 cm³/rev) | 4000 | 3300 |
| 1.404 / (23.0 cm³/rev) | 4000 | 3300 |
| 1.709 / (28.0 cm³/rev) | 4000 | 3100 |
| 2.014 / (33.0 cm³/rev) | 4000 | 3000 |
| 2.319 / (38.0 cm³/rev) | 4000 | 3000 |
| 2.685 / (44.0 cm³/rev) | 3205 | 2800 |
| 3.051 / (50.0 cm³/rev) | 2900 | 2700 |
| Displacement (cm³/rev) | Rated pressure (bar) | Maximum speed (RPM) |
|---|---|---|
| 19,0 | 276 | 3300 |
| 23,0 | 276 | 3300 |
| 28,0 | 276 | 3100 |
| 33,0 | 276 | 3000 |
| 38,0 | 276 | 3000 |
| 44,0 | 221 | 2800 |
| 50,0 | 200 | 2700 |
Product Features
-
Multiple Sections
Multiple Sections – Pumps
To meet specific customer needs, Concentric can design multiple section gear pumps, also in combination of different pump groups (e.g. Group 3 + Group 2).
These pumps are ideally suited to supply flow to multiple hydraulic functions from one power source.
.
Customer Value:
Compact design
Costs saving compared to separate pumps with associated fittings and hoses.
.
Multiple gear pump combinations are available with up to four sections with a wide interface range.
-
Valve Integration
Valve Integration – W-Series and F12-SeriesConcentric offers a wide range of integrated valve solutions for gear pumps and motors..Examples:Anti-cavitation check valves(Proportional) pressure relief valvesValve manifolds for multiple functions.Also speed sensors can be integrated.
-
Reinforced Front Bearing
Reinforced Front Bearing – W1500-Series
Concentric offers reinforced front bearings (with SAE-B interface) for extended radial and axial drive shaft load capabilities.Max. radial load: 6200 N
Max. axial load: 2600 N.Examples:Fan drivesBelt drives
